基于CMPSO算法的永磁同步电机转动惯量识别研究

永磁同步电机(PMSM)是一种具有很强非线性的动态系统,在工业驱动应用中发挥着重要作用。实时辨识转动惯量对于高精度PMSM系统控制和稳定性状态监测具有重要意义,但传统转动惯量识别方法精度较低。在传统离散模型参考自适应理论基础之上,用柯西变异粒子群优化(CMPSO)算法代替待辨识参数自适律设计环节,以实现PMSM转动惯量识别。该转动惯量辨识方法充分利用了CMPSO算法的快速高效收敛性,仿真结果和试验结果表明了可行性、正确性和准确性。     

Ionospheric TEC disturbances over China during the strong geomagnetic storm in September 2017

From September 7 to 8, 2017, a G4-level strong geomagnetic storm occurred, which seriously impacted on the Earth’s ionosphere. In this work, the global ionospheric maps released by Chinese Academy of Sciences are used to investigate the ionospheric responses over China and its adjacent regions during the strong storm. The prominent TEC enhancements, which mainly associated with the neutral wind and eastward prompt penetration electric field, are observed at equatorial ionization anomaly crests during the main phase of the storm on 8 September 2017. Compared with those on 8 September, the TEC enhancements move to lower-latitude regions during the recovery phase on 9 September. A moderate storm occurred well before the start of the strong storm causes similar middle-latitude TEC enhancements on 7 September. However, the weak TEC depletion is observed at middle and low latitude on 9–10 September, which could be associated with the prevailing westward disturbance electric field or storm-time neural composition changes. In addition, the storm-time RMS and STD values of the ionospheric TEC grids over China increase significantly due to the major geomagnetic storm. The maximum of the RMS reaches 12.0 TECU, while the maximum of the STD reaches 8.3 TECU at ~04UT on 8 September.     

Establishment of atmospheric weighted mean temperature model in the polar regions

Due to the special geographical location and extreme climate environment, the polar regions (Antarctic and Arctic) have an important impact on global climate change. Atmospheric weighted mean temperature (Tm) is a crucial parameter in the retrieval of precipitable water vapor (PWV) from the zenith wet delay (ZWD) of ground-based Global Navigation Satellite System (GNSS) signal propagation. In this paper, the correlation between weighted mean temperature and surface temperature (Ts) is studied firstly. It is shown that the correlation coefficients between Tm and Ts are 0.93 in the Antarctic and 0.94 in the Arctic. The linear regression Tm model and quadratic function Tm model of the Antarctic and the Arctic are established respectively using the radiosonde profiles of 12 stations in the Antarctic and 58 stations in the Arctic from 2008 to 2015. The accuracies of the linear regression Tm model, the quadratic function Tm model and GPT2w Tm model which is a state-of-the-art global Tm model are verified using the radiosonde profiles from 2016 to 2018 in the Antarctic and Arctic. Root Mean Square (RMS) errors of the linear regression Tm model, the quadratic function Tm model and GPT2w Tm model in the Antarctic are 3.07 K, 2.87 K and 4.32 K respectively, and those in the Arctic are 3.53 K, 3.38 K and 4.82 K, which indicates that the quadratic function Tm model has a higher accuracy compared to linear regression Tm model, and the accuracies of the two regional Tm models are better than that of GPT2w Tm model in the polar regions. In order to better evaluate the accuracy of Tm in the PWV retrieval, the PWV values of radiosondes are used for comparisons as the reference value. The RMS errors of PWV derived from the two Tm models are similar for 1.28 mm in the Antarctic and 1 mm in the Arctic respectively. In addition, the spatial and temporal variation characteristics of Tm are analyzed in the polar regions by spectral analysis of Tm data using fast Fourier transform. The results show that the Tm has obvious seasonality and annual periodicity in the polar regions, and the maximum difference between warm season and cold season is about 63 K. After comparing and analyzing the influences of latitude, longitude and elevation on the Tm in the polar regions, it is found that latitude and elevation have a greater influence on the Tm than the longitude. As the latitude and elevation increase, the Tm decreases, and vice versa in the polar regions.     

拓扑数据分析在复杂脑网络分析中的应用

针对复杂脑网络分析中网络结构变化阈值选择中没有公认的标准确定合适阈值这一问题，基于拓扑分析中的持续同调性理论，本文提出一种多尺度大脑网络建模分析方法，该方法在大脑全尺度距离范围之内，通过不断增加阈值，运用Rips过滤算法捕获网络的动态持续拓扑特征，并用条形码和持续图对拓扑特征可视化，最后通过计算持续图之间的Bottleneck距离和Wasserstein距离分析持续特征的稳定性。实验结果表明，该方法能更准确地提取大脑网络的拓扑结构特征并提高诊断分类的准确性。     

ADS-B监视报文参数统计及其所需性能

基于广播式自动相关监视（ADS-B）报文的位置导航不确定性指标（NUC_P）的监视质量备受关注。针对位置导航不确定性参数好、监视质量却不高的问题，深入研究广播式自动相关监视报文数据项及其与基于性能的通信与监视的相关性。在充分考虑通信导航监视相关性及全球卫星导航系统（GNSS）广域增强等因素基础上，推导、构建了监视所需性能估计模型，并给予合理简化。在测试空域利用2个具有运行资质的生产商ADS-B接收站，连续采集近2亿条ADS-B报文，统计分析报文各信息项的状态参数，并应用到所需性能估计模型评估计算这两个ADS-B站的所需监视性能。此外还将参考文献报文参数代入模型评估所需性能。结果显示，当考虑报文各信息项统计状态及具备广域增强服务支撑时，ADS-B所需监视性能参数估计值未达到99.9%要求。若缺乏广域增强服务及相关性因素等，系统所需性能与国际民航组织（ICAO）监视要求的差距则更大。     

熔融沉积成型连续碳纤维增强尼龙蜂窝芯材的压缩特性

采用熔融沉积成型方法成形了连续碳纤维增强尼龙复合材料蜂窝芯材,并对不同测试方向的静态单轴压缩特性进行了表征分析,着重关注不同测试方向熔融沉积成形蜂窝芯材平面静态压缩破碎行为和能量吸收行为,并与纯聚合物基体进行对比。结果表明:X_1方向的压缩平台区域的力-位移曲线更加平滑稳定,且载荷值稍高于X_2方向,因此X_1方向更适用于能量吸收应用;此外,连续纤维的增强作用可使蜂窝芯材的平台载荷值得到明显提升。研究结果为连续纤维增强聚合物复合材料的空间增材制造提供理论基础。     

低轨天基信息定向分发区域分割编码控制方法

为提高低轨指向性信息分发链路的频谱利用效率，从天基分发平台与地面用户的相对位置关系入手，建立了分发指向、编码增益与信道传输容量的量化关系。在此基础上，提出一种低轨天基信息定向分发区域分割编码控制方法，该方法针对不同信息分发区域，采用最小均方误差(MMSE)作为区域分割准则选择编码方式，既提升了信道传输效率也便于工程实现。最后，本文通过仿真分析了方法的效能和性能影响因素，并与现有自适应编码方法进行了对比，验证了本方法的有效性和可靠性。     

Ground experiments of Chang’e-5 lunar regolith penetrating radar

The Lunar Regolith Penetrating Radar (LRPR) is an Ultra-Wideband (UWB) array-based Ground penetrating radar (GPR) onboard the lander of Chang’e-5 (CE-5) mission. The primary scientific objectives of the LRPR are to probe the thickness and structure of lunar regolith of the landing site, and support the drilling and sampling process. In order to evaluate the performance of the LRPR, a series of ground experiments are performed using the LRPR prototype mounted on a CE-5 lander model. The performance of the LRPR is evaluated by comparing the experimental data with the simulated data. Data processing and imaging method are verified, and the interferences from the lander and other aspects are analyzed. The results of the ground experiments and simulation demonstrate that the LRPR is able to meet the design requirement of 2-m detection depth. They also indicate that the upper and lower interfaces of the stratified structure in the lunar regolith can be well distinguished by the LRPR when the dielectric constant difference is greater than 0.3, and the imaging effect of the location under the dense antennas is better than that of other positions. However, the identification capability of the LRPR to the independent blocky objects is relatively poor mainly due to the clutters caused by the lander, the sparsity of the antenna elements compared to the size of the basalt block, the limited aperture of the antenna array, and the tail of the transmitted waveform.     

火星轨道交会自主导航与制导方法

对火星采样返回任务中的火星轨道交会自主导航和制导技术进行了研究。采用光学自主导航敏感器测量的火星中心方向和视半径，相对敏感器测量的相对位置等观测量，设计了导航滤波器同时估计轨返组合体和上升器的轨道。在导航滤波器设计中，针对光学自主导航敏感器更新频率远低于滤波解算频率的问题，设计了一种连续观测量构造算法，确保每个滤波周期均可进行测量更新，以提高导航精度。基于导航滤波器估计结果，采用T-H制导设计了4脉冲共椭圆交会策略实施轨道控制，从而构成近程交会自主导航和制导方案用于完成火星轨道交会任务。通过数学仿真校验了所提出方法的有效性。     

微型化半球陀螺制备工艺发展现状及趋势分析

因低噪声、高性能、无磨损的优势，半球陀螺已成为航空、航天领域内的最佳导航陀螺。半球陀螺的微型化是微机电陀螺领域的研究热点，全球各研究单位设计了多种形态的谐振器结构，开发了各具特色的加工工艺，其选用的材质也各不相同，并研制出了形态各异的微半球陀螺结构。对半球陀螺微型化的历程和方式进行了综述，着重对微型化半球陀螺壳体谐振器的结构形态、工艺制备方法和选材进行了对比和分析，并对各微型化途径的特点进行了讨论和展望。